Zhejiang Chenxin Machine Equipments Co., Ltd.

Trichloroethylene Recycler, Recycler, Trichloroethylene manufacturer / supplier in China, offering Trichloroethylene Recycler (HHS-I), AC Asphalt Mortar Mixer (CXS-II), Automatic Temperature Control Digital Displays Asphalt Extensometer (SY-2.0) and so on.

Supplier Homepage Product List bitumen asphalt series Trichloroethylene Recycler (HHS-I)

Trichloroethylene Recycler (HHS-I)

FOB Price: Get Latest Price
Min. Order: 1 Set
Production Capacity: 80 Sets/Month
Payment Terms: L/C, T/T, D/P

Basic Info.

Model NO.:HHS-I

Product Description

1. Usage

The ministry of communications prescribed adopting centrifugal separation method for bitumen combined material bitumen content test (T0722-93) in "Road Project Bitumen and Bitumen Combined Material Test Rule" for testing and appraising the bitumen mixed in the product quality when hot mixing and hot paving and checking the bitumen content in bitumen combined material. In this test, the CHO3 must be used as solvent for extracting. Because the dose of CHO3 is large, and the price is very high, so it is necessary to recycle the CHO3 in bitumen solution. The Trichloroethylene Recycler is designed rationally, operating easily, recycle speed quickly, it can save the cost of CHO3 for the unit.

2. Structure

(1) The Trichloroethylene Recycler is mainly composed by combined solution evaporator chamber, condensation chamber, cycle cooling water and temperature control part.

(2) Insert the two plastic tubes at the back of the left control cabinet into cooling water connecter on the cover of main cabinet. Connect the thermoelectric couple wire on the right bottom back of the main cabinet to three posts on the back of the control cabinet. (Red must be connected to red). Insert the heating tube wire plug into the socket on the back of the control cabinet.

(3) The instrument is no need the outer water source. Pour clean water into the round hole on the control cabinet slowly until to the open of the hole. Turn on the power and cooling switches. Compensate a little water when the water level decreases.

(4) Unscrew the cover of the charging connection, pour in some bitumen combined extraction solution, the volume should be in the range of 1500ml ~ 5500ml, at least appears on the solution tube and make sure the heating tube is immersed in the extraction solution. Screw the cover against the cabinet. Fasten the agraffs on the both sides with the bottom.

(5) Set the temperature. The instrument heats automatically to the set temperature and keep it constantly. It enters into the recycle status.

Heating power




Temperature control apparatus error


Compressor power


Primary recovery of combined liquid volume

Send your message to this supplier
Mr. Alvin
To Mr. Alvin
Enter between 20 to 4,000 characters.
This is not what you are looking for? Post a Sourcing Request Now

Zhejiang Chenxin Machine Equipments Co., Ltd.

- Zhejiang, China
- Manufacturer/Factory

Gold Member Since 2011
Audited Supplier