Cxwdw-10 Servo Electronic Tensile Strength Testing Machine

1. Usage
CXWDW-10 Servo Electronic Tensile Strength Testing Machine is mainly applicable for many kinds of test such as tensile, compression, bending, and so on. It also could do the test of creep deformation, duration, stress relaxation, low cycle test and tensile test under low temperature or high with related accessories.

2. Range
CXWDW-10 Servo Electronic Tensile Strength Testing Machine can do the test of crankle, pure torsion, stop log bending and press stable by fitting multi-functional material dynamics experimentally teaching facility; it can do the test of tensile, gripping, tearing, burst, pierce to the geotechnical composite material according to SL/235-1999 "Geotechnical Composite Material Test Rules"; tensile, compression, torsion test of biomechanics; labor security supplies security test; mechanical property test to material of wood and hard board according to test method of GB/T17657 "Hard Board Veneer Hard Board Physicochemical Performance Test Method" and GB/T1935~1943 wood material test method.

3. Test force

3.1.     Max. test force: 10KN
3.2.     Valid measure range: 0.2%~100%F.S.
3.3.     Resolution: 1/60000, 1/120000, 1/240000, 1/300000, 1/400000, 1/500000 (self setting according to the test requirement)
3.4      Measuring relative error: ±0.5%

4. Test Speed

4.1.       Adjusting range: 0.005~500mm/min (stepless adjustment)
4. 2.       Accuracy: ±0.5%
4. 3.       Control range even test force speed rate and even deformation rate: 0.01%-10%F.S.
4. 4.       Control error even test force speed rate and even deformation rate: ±0.5%
4. 5.       Control range of invariable test force and invariable deferment: 0.5%~100%F.S.
4. 6     Control error of invariable test force and invariable deferment: ±1% of setting point when less than 10%F.S.; ±0.1% of setting point when high than 10%F.S.

5. Displacement
5. 1.       Measuring range: 0~999mm
5. 2.       Resolution: 0.001mm
5.3       Measuring relative error: ±0.5%

6. Deformation
6.1.       Gauge length: 50mm (according to the requirement of customer)
6.2.       Output range: 0-5mm (according to the requirement of customer)
6.3.       Valid measuring range: 0.2%~100%F.S.
6.4.       Resolution: 1/60000, 1/120000, 1/240000 (self setting according to the test requirement)
6.5      Measuring relative error: ±0.5%

7. Security
Position limiter; emergency switch; the control system can protect automatically once over-load, over-currency, over-voltage, over-temperature